Reticles

MR10+  ZP8 1-8x24
ReticleSubtensions
CCR reticle system - daylight red dot illumnimation and twilight illuminated reticle
Reticle at the 1st focal plane with 1 mrad marks
Floating dot in the center for low target coverage and precise aiming
1 mrad space in the center to enable precise 0.5 mrad point-of-aim correction
Clearly visible 2 mrad horizontal line at 5 mrad for quick orientation
Tapered outer bars to enable quick target acquisition even with deactivated reticle illumination, covering less of the target at larger magnifications
Marks for quick point-of-aim acquisition at changing distances and influences of wind
Marks for maintaining point-of-aim on moving targets
Quick distance estimation up to 800 m
MR10  ZP8 1-8x24
ReticleSubtensions
CCR reticle system - daylight red dot illumnimation and twilight illuminated reticle
Reticle at the 1st focal plane with 1 mrad marks
Floating dot in the center for low target coverage and precise aiming
1 mrad space in the center to enable precise 0.5 mrad point-of-aim correction
10 mrad holdover marks for fast point-of-aim acquisition at longer distances
Clearly visible 2 mrad horizontal line at 5 mrad for quick orientation
A8-D  ZP8 1-8x24
ReticleSubtensions

CCR reticle system – daylight red dot illumination and twilight illuminated reticle
Symmetrical bars for easy centering on the target
Floating dot in the center for low target coverage and precise aiming
1 mrad space in the center to enable precise 0.5 mrad point-of-aim correction
CCR  Complete Combat Reticle

The Complete Combat Reticle technology found in the ZP8 is made up of a unique combination of two illuminated reticles – one for use in twilight and one for use during daylight. Switching from one to the other occurs automatically during a change in magnification. Between the 1x and 2.5x magnification, the illuminated dot is activated. Beyond that, the twilight reticle illumination is activated, where the entire inner area of the reticle is illuminated to enable full usage of all main reticle functions by night.

Fastest estimation of distances in every situation

The MR10+ reticle in the ZP8 is equipped with specialised markings to determine the upper body sizes of the targets. Not only can the torso height of 1 m (39.4'') and shoulder width of 50 cm (19.7'') be determined as a reference measurement, but also the height to the shoulders of 70 cm (27.6'') and the height from the shoulder to the top of the head of 30 cm (11.8''). The distances between 300 m (328 yds.) and 800 m (875 yds.) can be directly determined without calculation steps.

MR5  ZP5 3-15x50 and 5-25x56
Reticle
Subtensions 3-15x50Subtensions 5-25x56
For flexibel tactical operations without compromise
Optimal usability throughout the entire magnification range and operational distances
Medium thickness of marks within the crosshair to ensure easy target acquisition in difficult situations, at the same time providing a precise center with tapered bars for maximum target visibility
Extended crosshair illumination to maintain full usability of the reticle in low light situations
AQRAS and Mrad scales for fast and precise distance determination
Important subtensions are carefully matched to the respective magnification ranges (3–15x or 5–25x)
MR4  ZP5 5-25x56
ReticleSubtensions
Designed for the ambitious long range shooter, tailored to the requirements of dynamic long range and tactical competition shooting
Floating center dot for a clear view of even very small targets and highly precise aiming
Consistent 0.2 mrad graduations right from center and throughout the reticle allow for accurate point of aim corrections in rapidly changing conditions when there is no time for dialing the turrets
Ultra-fine 0.1 mrad ranging scale for precise milling down to 0.05 mrad
Illumination of the main reticle features usable from overcast daylight to nighttime applications
Holdover marks for extremely long range outside the turret adjustment range
Extended horizontal marks for moving targets are clearly visible at low magnification
MR2  ZP5 3-15x50 and 5-25x56
Reticle
Subtensions 3-15x50Subtensions 5-25x56
Designed to meet the highest demands for precision at long distances
All proportions are designed for various fields of use with a wide range of magnification and at varying distances
Divided into 1 mrad, 0.5 mrad, and fine 0.2 mrad marks
Fine mark thickness with extra fine central crosshair for small targets and highest precision
The illuminated crosshair in the center measures 1x1 mrad for fast distance determination and point-of-aim correction
The symmetrical bars are tapered at the center to provide maximum target visibility at larger magnifications and easy target acquisition at lower magnifications
AQRAS and Mrad scales for fast and precise distance determination
Important subtensions are carefully matched to the respective magnification ranges (3–15x or 5–25x)
Mildot  ZP5 3-15x50 and 5-25x56
Reticle
Subtensions 3-15x50Subtensions 5-25x56
Common standard reticle for tactical riflescopes
Simple and easy to read: each dot is positioned at 1 mrad intervals and are clearly seen even under adverse conditions; the symmetric bars aid to quickly center on the target
The illuminated crosshair in the center measures 1x1 mrad for fast distance determination and point-of-aim correction
Through carefully selected dimensions of the reticle, target values can be determined with an accuracy of 0.1 mrad when determining distances
AQRAS  Advanced Quick Ranging Scale

The AQRAS Scale is a universal tool used for determining distances. It works differently than those scales limited to fixed and known target sizes. Simply apply the scale to a known dimension on the target, read the value and multiply it by the target size.

Target size [cm] x scale value = distance [m]

This simple calculation can be made without having to use any tools and without having to lose sight of the target. The division required with traditional MIL formulas is integrated into the scale. The distance for 1 meter height or width can be read directly from the scale. The AQRAS scale uniquely combines the speed of conventional scales with a flexible use on any target size.

Mrad Scale

The Mrad Scale is symmetrically situated across from the AQRAS scale and has easy to read fine 0.1 mrad marks for highest precision. It is used to accurately determine distances to targets of known size with the help of this MIL formula:

Target size [mm] ÷ scale value [mrad] = distance [m]

While the AQRAS scale values between the marks have to be estimated, the Mrad scale ensures the highest possible reading accuracy and makes it the ideal supplement for especially precise distance measurements. For an effective usability, the scales are located close to the center of the visual field without distracting from the main functions of the reticle.